FleetKleen Industrial Strength Cleaner & Degreaser
FleetKleen Case Study
This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™ (Example: When 5 gallons of FleetKleen is actually diluted to the minimum 1:15 you get approx 75 useable gallons!!!)
FleetKleen™ is a new concept in the cleaning and degreasing of driveways, concrete floors, metal grating, cement and most solid surfaces. This product utilizes Bio-Remedial technology to literally "eat" grease, oil, and hydrocarbons off any hard surface. This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons. FleetKleen™ contains no solvents and is non-flammable. It is non-toxic, non-hazardous, non-corrosive and non-caustic. When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place.
APPLICATIONS
While FleetKleen™ can be used in all phases of manufacturing, commercial and industrial operations, the following is a partial list of the many uses of this product. Please contact Green State Services, if you have any questions about its usage:
- Driveways
- Loading Docks
- Manufacturing Floors
- Fueling areas
- Lubrication Areas
- Machine Shops
- Garages
- Warehouses
|
- Hydraulic Line Breaks
- Lubricant Pipeline Breaks
- Equipment Failures
- Tool Shops
- Elevator Pits
- Oil Storage Areas
- Chemical Storage Area
- Auto & Truck Wash Areas
|
- Blow Pits
- Maintenance Areas
- General House-Keeping
- Vehicle Parking Area
- Pumping Stations
- Concrete Walls
- Brick & Gravel Areas
- Vehicle Maintenance Areas
|
HOW TO USE THIS PRODUCT
FleetKleen™ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15parts water to 1 part FleetKleen™ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.
PRESSURE WASHER PROCEDURE:
1. Insert the mixing tube of the pressure washer directly into the spout of the container.
2. This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
3. Adjust concentration levels as appropriate.
4. Apply the mixture directly on the area you wish to clean and degrease.
5. Use the "pressure" to aerate and agitate the "stubborn" areas.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.
MANUAL SPRAYER & BRUSH PROCEDURE:
1. Pre-mix FleetKleen™ in an industrial sprayer at an appropriate concentration level.
2. This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
3. Spray the stained area with the mixture, being sure to cover the area to be cleaned.
4. Wait a few minutes before going to next step.
5. Agitate and aerate the area with a stiff brush or broom.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.
FOR OPTIMUM EFFECTIVENESS, A WATER TEMPERATURE BETWEEN 80° F. AND 90° F. SHOULD BE MAINTAINED. DO NOT EXCEED A WATER TEMPERTATURE OF 120° F